Citizen 2200 Quartz Movement | 2200A 2200E Specifications & Service

The Gilded Hour technical archive · Historical quartz and mechanical watch references · Research reviewed 21 November 2026

Citizen 2200 is a vintage small-format quartz movement family. A period technical parts catalogue groups the 2200A and 2200E with related 2201E, 2202A and 2250A variants and documents their unusual 20-second stepping display.

Identification first: Citizen 2200A / 2200E family.

The period parts document supports the movement architecture and sizes, but a universal battery equivalence for every vintage 2200 watch has not been verified here. Battery specification deliberately remains unconfirmed.

Technical snapshot

Documented variants 2200A, 2200E (with related 2201E, 2202A, 2250A)
Movement type Quartz crystal oscillator
Display Hour and minute hands; no seconds hand
Stepping interval 20-second step
Oscillator frequency 32,768 Hz
Movement thickness 1.87 mm (2200A / 2200E group)
Power-cell section height 1.9 mm, as marked in technical sheet
Jewels 6 in the period parts-list table
Published dimension callout 9.0 × 13.2 × 13.5 mm as shown in period sheet; geometry labels require interpretation
Replacement cell Not yet independently verified for each variant

Specifications here are tied to the sources listed below. The physical watch, exact calibre suffix and movement engraving control a service decision.

Battery and calibre identification

Do not assign SR616SW, SR621SW or another modern battery from a caseback code alone. The historical drawing lists the power cell and holder parts but the modern cell cross-reference for each revision needs confirmation. A watchmaker should inspect the exact 2200A or 2200E stamp and measure the original battery well before replacement.

The period document prints the movement-size callout as “9.0 × 13.2 × 13.5 mm,” without separating those values into a clear contemporary width/length convention. That ambiguity is preserved rather than silently turned into a new claimed dimension.

How the movement works

The technical catalogue specifies a 32,768 Hz quartz oscillator, no seconds hand and a 20-second step mechanism. It also notes non-volatile memory. The distinctive stepping arrangement is a documented design feature, not enough by itself to prove a particular installed calibre.

Examples in The Gilded Hour archive

These are watches whose existing catalogue records identify this calibre. A listing attribution is not itself factory proof of the installed movement; refer to the individual watch record and original photographs for confirmation.

Documentary movement photograph: not yet added for this calibre. We do not substitute a fabricated illustration or infer engravings from the watch exterior.

Service and parts cautions

The document separates battery holder, battery connector, insulator, setting-lever components and circuit. A correct movement identification still requires examining the internal engraving or the complete manufacturer's case code, and confirming its suffix and parts list. Do not assume that 2200A and 2200E have universally interchangeable holders or stems.

Sources and verification

  1. Citizen 2200A / 2200E period technical parts catalogue scan — Architecture, variant list, thickness, 20-second step, oscillator and jewel count
  2. Citizen calibre/manual lookup — Official guidance on identifying the movement number on the caseback
  3. Citizen battery information directory — Model- and calibre-specific lookup, not a substitute for identifying this vintage variant

The Gilded Hour is an independent technical archive, not an official service department for Citizen. Quoted values are source-linked; original manuals remain on their respective publishers' websites. Replacement batteries and parts must be checked on the actual movement.