Omega 485 Manual Wind Movement | Dimensions, Jewels & Service Guide
The Gilded Hour technical archive · Historical quartz and mechanical watch references · Research reviewed 21 November 2026
Omega calibre 485 is a compact hand-wound mechanical movement from the 480-family lineage, used in slender women's dress watches. Unlike the quartz calibres in much of this library, it is powered by a mainspring and has no battery.
Omega 485 is manually wound. Its service priorities concern condition, lubrication, winding components and timekeeping, not a replacement coin cell.
Technical snapshot
| Manufacturer / designation | Omega calibre 485 |
|---|---|
| Movement type | Hand-wound mechanical |
| Number of jewels | 17 (mechanical movement references) |
| Movement dimensions | Approximately 12.5 × 15.5 mm (Ranfft reference) |
| Movement height | Approximately 3.2 mm (Ranfft reference) |
| Oscillation rate | 21,600 beats/hour |
| Typical reported power reserve | Approx. 46 hours when fully wound and healthy |
| Seconds display | No seconds hand in the documented version |
| Movement lineage | Omega 480 / 481 / 482 / 483 / 484 / 485 family |
Specifications here are tied to the sources listed below. The physical watch, exact calibre suffix and movement engraving control a service decision.
Battery and calibre identification
There is no SR or button-cell battery specification for the Omega 485 manual-winding movement. An owner winds it by turning the crown; if the watch stops or does not hold a reserve, assess the mainspring, winding train and overall condition with a qualified watchmaker.
A photographed movement engraving is especially important because online calibre databases contain inconsistent historical entries for the bare number “485.” Confirm Omega branding and the mechanical construction before using any part number.
How the movement works
The mainspring supplies energy through a conventional mechanical train, escapement and balance, rather than a quartz circuit and coil. Technical references place the 485 in the 480 family and describe it as a 17-jewel movement beating at 21,600 vph. Around 46 hours is a reported reference reserve for a healthy example, not a service guarantee on an older watch.
Examples in The Gilded Hour archive
These are watches whose existing catalogue records identify this calibre. A listing attribution is not itself factory proof of the installed movement; refer to the individual watch record and original photographs for confirmation.
Documentary movement photograph: not yet added for this calibre. We do not substitute a fabricated illustration or infer engravings from the watch exterior.
Service and parts cautions
Interchange should not be inferred from the 480-family name alone. Movement height, stem height, dial-foot locations, hands, bridges and case clearance can differ. An older watch with erratic running should be tested for amplitude and rate in multiple positions before a technician decides on a full service or parts replacement.
Never attempt to fit a battery to a mechanical Omega 485; the absence of a cell is fundamental to the movement type.
Sources and verification
- Ranfft Omega 485 calibre reference — Dimensions, height, 17 jewels, reserve and 21,600 bph
- Watch Movements Archive — Omega 485 — 480-family development history, 485 designation and mechanical operation
- 17jewels.info Omega 485 — Independent specimen measurements and historical service observations
The Gilded Hour is an independent technical archive, not an official service department for Omega. Quoted values are source-linked; original manuals remain on their respective publishers' websites. Replacement batteries and parts must be checked on the actual movement.