Seiko 3F31 Movement | SR616SW 321 Battery & Technical Reference
The Gilded Hour technical archive · Historical quartz and mechanical watch references · Research reviewed 21 November 2026
Seiko 3F31 is a high-accuracy analogue quartz calibre associated with Exceline watches. Its battery and stated annual accuracy appear in a Seiko instruction manual that also covers the related 3F30; the details below retain that manufacturer's distinction from ordinary monthly-accuracy quartz movements.
Seiko specifies SB-AF for 3F30/3F31. Seiko Instruments maps SB-AF to a 1.55 V SR616SW cell, 6.8 mm in diameter and 1.65 mm high. This is not the thicker 364 / SR621SW.
Technical snapshot
| Calibre | 3F31 |
|---|---|
| Movement type | Analogue quartz |
| Battery | Seiko SB-AF · SR616SW / 321 |
| Nominal cell dimensions | 6.8 × 1.65 mm |
| Battery lifespan | Approx. 2 years (new cell; Seiko instruction manual) |
| Published accuracy | ±20 seconds/year under stated Seiko conditions |
| Related manufacturer grouping | 3F30 / 3F31 |
Specifications here are tied to the sources listed below. The physical watch, exact calibre suffix and movement engraving control a service decision.
Battery and calibre identification
Read the first four characters of the watch calibre on the caseback and inspect the battery compartment when opened. Seiko's battery/accuracy table lists 3F30 and 3F31 together. The battery cross-reference should be chosen from that precise code, not simply because a cell fits a 6.8 mm diameter opening.
Seiko SB-AF converts to SR616SW (321) in the Seiko Instruments chart. SR621SW (364) has a larger thickness, so it is not an automatic alternative.
How the movement works
The movement is quartz regulated. Seiko's owner manual places 3F31 in its high-accuracy family with an annual, rather than monthly, accuracy tolerance. That published figure describes normal specified operating conditions, not a guarantee for a decades-old watch with unknown maintenance history.
Examples in The Gilded Hour archive
These are watches whose existing catalogue records identify this calibre. A listing attribution is not itself factory proof of the installed movement; refer to the individual watch record and original photographs for confirmation.
Documentary movement photograph: not yet added for this calibre. We do not substitute a fabricated illustration or infer engravings from the watch exterior.
Service and parts cautions
Check the caseback suffix, circuit condition, coil, stem and battery insulator before service. Avoid describing a movement as 3F31 purely because its exterior resembles a 3F30 or another Exceline model. Where a listing identifies the movement from a dial or caseback rather than a movement photograph, that limitation should remain visible.
Sources and verification
- Seiko official grouped instruction manual — 3F31 battery type, two-year lifespan and annual accuracy, page 74
- Seiko Instruments battery cross-reference — SB-AF to SR616SW / 321 and physical cell dimensions
- Mizeni calibre reference — Secondary confirmation of 3F31 identity and Exceline application
The Gilded Hour is an independent technical archive, not an official service department for Seiko. Quoted values are source-linked; original manuals remain on their respective publishers' websites. Replacement batteries and parts must be checked on the actual movement.